

CWW-M/K 181-P÷522-P
Watercooled liquid Chillers and Heat Pumps with Scroll compressors and plate exchangers





The CWW-M/K 181-P÷522-P HYDROPLUS liquid Chillers and Heat Pumps, with R410A refrigerant, are designed for medium-sized domestic or industrial systems which require medium-high power, space-saving units and quiet operation. This range is ideal for indoor installation and, equipped with a self-contained structure, it reduces the overall dimensions to a minimum while at the same time making installation and maintenance operations easier.
Equipped with prepainted plate structure, Scroll compressors and plate type exchangers, these units have cooling and hydraulic circuits complete with everything necessary for quick installation and high energy efficiency, even in the version with tank and pump.
A wide series of accessories, factory-assembled or supplied separately, such as the desuperheater or the total heat recovery, rounds off the variety of equipment in this product range.
Версии
- CWW-M/K - Cooling only
- CWW-M/K/WP - Reversible Heat Pump
диапазон мощности
- 58,0-176 kW
- 16,0-50,0 Ton
Характеристики
- Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
- Scroll compressors with oil sight glass, internal overheat protection and crankcase heater.
- Condenser AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side.
- Evaporator AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side, completed with water differential pressure switch.
- R410A refrigerant.
- Electrical board includes: main switch with door safety interlock, protection modules and overload protection for compressors.
- Microprocessor control and regulation system.
Принадлежности
Принадлежности, установленные на заводе
- SL Шумоизолирующий кожух
- BT Комплект для работы при низких температурах воды
- DS Охладитель перегретого пара
- RT Полная утилизация тепла
- IS Интерфейсная плата RS485
Принадлежности, поставка отдельно
- MN Манометры высокого и низкого давлений.
- CR Пульт дистанционного управления
- SPU Бак-накопитель и один циркуляционный насос
- SPD Бак-накопитель и два циркуляционных насоса
- PV2 2-ходовой клапан, регулируемый по давлению
- PV3 3-ходовой клапан, регулируемый по давлению
- AG Резиновые виброизолирующие опоры
- AG1 Rubber shock absorbers for SPU and SPD modules
Technical data
181-P | 241-P | 301-P | 392-P | 522-P | |||
Охлаждение | Холодопроиз-ть (1) | kW | 57,5 | 73,9 | 94,5 | 137 | 176 |
Потребл. мощность (1) | kW | 13,2 | 16,9 | 21,9 | 31,9 | 41,3 | |
Охлаждение (EN 14511) | Холодопроиз-ть (1) | kW | 57,1 | 73,4 | 94,0 | 136 | 175 |
Потребл. мощность (1) | kW | 14,0 | 17,9 | 23,1 | 33,5 | 43,5 | |
EER (1) | 4,08 | 4,08 | 4,07 | 4,07 | 4,03 | ||
Нагрев | Теплопроиз-ть (2) | kW | 71,3 | 92,4 | 116 | 168 | 218 |
Потребл. мощность (2) | kW | 16,8 | 21,3 | 27,6 | 40,6 | 51,9 | |
Нагрев (EN 14511) | Теплопроиз-ть (2) | kW | 71,9 | 93,2 | 117 | 169 | 219 |
Потребл. мощность (2) | kW | 17,7 | 22,5 | 28,8 | 42,3 | 54,2 | |
COP (2) | 4,06 | 4,14 | 4,06 | 4,00 | 4,05 | ||
Компрессоры | Количество | n° | 1 | 1 | 1 | 2 | 2 |
Фреоновые контуы | n° | 1 | 1 | 1 | 1 | 1 | |
Ступени производительности | n° | 1 | 1 | 1 | 2 | 2 | |
Evaporador | Расход воды | l/s | 2,75 | 3,53 | 4,52 | 6,55 | 8,41 |
Падение давления | kPa | 43 | 52 | 46 | 51 | 56 | |
Подсоед. по воде | DN | 32 | 32 | 65 | 65 | 65 | |
Конденсатор | Расход воды | l/s | 3,38 | 4,34 | 5,56 | 8,07 | 10,38 |
Падение давления | kPa | 52 | 59 | 48 | 54 | 60 | |
Подсоед. по воде | DN | 32 | 32 | 65 | 65 | 65 | |
Электрические характеристики | Сеть питания | V/Ph/Hz | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 |
Макс. рабочий ток | A | 39 | 48 | 59 | 95 | 119 | |
Пусковой ток | A | 215 | 260 | 320 | 308 | 379 | |
Агрегат с баком и насосом | Располагаемый напор | kPa | 125 | 100 | 120 | 125 | 120 |
Объем бака-накопителя | l | 300 | 300 | 300 | 300 | 300 | |
Подсоед. по воде | "G | 2 ½" | 2 ½" | 2 ½" | 2 ½" | 2 ½" | |
Schalldruck | Стандартная версия (3) | dB(A) | 59 | 59 | 60 | 60 | 62 |
С опцией SL (3) | dB(A) | 56 | 56 | 57 | 57 | 59 | |
Масса | Транспортный вес (4) | kg | 372 | 391 | 456 | 609 | 725 |
Рабочий вес (4) | kg | 380 | 400 | 470 | 620 | 750 |
Dimensions
181-P | 241-P | 301-P | 392-P | 522-P | |||
L | МОДЕЛЬ | mm | 1200 | 1200 | 1200 | 1600 | 1600 |
МОДЕЛЬ + SPU/SPD | mm | 2310 | 2310 | 2310 | 2710 | 2710 | |
W | МОДЕЛЬ | mm | 680 | 680 | 680 | 680 | 680 |
МОДЕЛЬ + SPU/SPD | mm | 680 | 680 | 680 | 680 | 680 | |
H | МОДЕЛЬ | mm | 1520 | 1520 | 1520 | 1520 | 1520 |
МОДЕЛЬ + SPU/SPD | mm | 1520 | 1520 | 1520 | 1520 | 1520 |
Примечания
- 1 Холодная вода 12/7 °C, температура воды на конденсаторе 30/35 °C.
- 2 Горячая вода 40/45 °C, температура воды на испарителе 15/10°C.
- 3 Уровень звукового давления в свободном поле на расстоянии 1 м. от агрегата. Согласно ISO 3744.
- 4 Агрегат без бака-накопителя и насоса.
- N.B. (1) Масса тепловых насосов приведена в соответствующей технической документации.
Документы
- Product overview 00_clint_international_product_over_09.2019_w.pdf
- Product guides _clint_international_product_guide_09.2019_w.pdf
- Commercial leaflets 02_clint_international_leaflet_hydroplus_09.2019_w.pdf
- Technical brochures 13_CWW-M_K_181-P-522-P_clbm_137.7.pdf
- Installation, use and maintenance manuals CWW-MK-181P_522P_CLMM_137.7_x5N7nEM.pdf