CHA/H/A 351÷1221

High efficiency air cooled liquid chillers with axial fans, (Inverter) Screw compressor and shell and tube exchanger

_icona_clint_solo_raffreddamento_2024.psd

_icona_clint_compressore_screw_inverter_2024.psd

_icona_clint_exchanger_shell_and_tube_2024.psd

_icona_clint_exchanger_microchannel_coil_2024.psd

_icona_clint_solution_web_monitoring_2024.psd

_icona_clint_solution_A_class_cooling_2024.psd

The units are compliant to the ErP 2021 Regulation for process cooling application; for comfort cooling application they are compliant if provided with EC or ECH accessory (EC Inverter fans).

Versions

CHA/H/A - Cooling only
CHA/H/A/MC - Cooling only with MICROCHANNEL condensing coils
CHA/H/A/SSL - Super silenced cooling only
CHA/H/A/MC/SSL - Super silenced cooling only with MICROCHANNEL condensing coils

Power range

79,0-211 kW
22,0-60,0 Ton

Features

Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
Screw compressor with built-in oil separator, suction filter, crankcase heater, oil sight glass, thermal protection and stepless capacity steps.
Axial fans directly coupled to an electric motor with external rotor.
Condenser made of copper tube and aluminum finned coils or aluminium MICROCHANNEL coils.
Shell and tube evaporator with one independent circuit on the refrigerant side and one on the water side.
Cooling circuit shut-off valves on discharge and liquid line.
Electronic expansion valve.
Electronic high and low pressure gauges.
Electrical board includes: main switch with door safety interlock, fuses, thermal protection relays for compressors and thermocontacts for fans.
Condensing Control is included: electronic proportional device that ensures efficient and continuous functioning of the unit with outside air temperature down to 0 °C. It also allows to reduce the sound level especially at night. It consists of a fans speed controller with continuous speed regulation and high and low pressure transducers on cooling circuit.
Microprocessor control and regulation system.

Accessories

Factory fitted accessories

IM Automatic circuit breakers
RE Adjustable minimum/maximum voltage and phase control relay
SL Unit silencement
DSV Double relief safety valve with changeover switch on the high pressure side for each refrigerant circuit
DSVHL Double relief safety valve with changeover switch on the high and on the low pressure side of each refrigerant circuit
CC Condensing control down to -20 °C
BT Low water temperature kit
EC EC Inverter fans
ECH EC Inverter fans with high available static pressure
HRT/S Total heat recovery in series
TX Coil with pre-coated fins
TXB Coil with epoxy treatment
EW External water connections
SP Inertial tank
PU Single circulating pump
PUI Inverter single circulating pump
PD Double circulating pump
PDI Inverter double circulating pump
SPU Inertial tank and single circulating pump
SPUI Inertial tank and Inverter single circulating pump
SPD Inertial tank and double circulating pump
SPDI Inertial tank and Inverter double circulating pump
GS Single circulating pump gasket for glycol >30%
GD Double circulating pump gaskets for glycol >30%
FE Antifreeze heater for evaporator
FB Antifreeze heater for evaporator/tank
IQ Inverter on one compressor
SS Soft start
WM Web Monitoring - Wireless remote monitoring (4G)
IS Modbus RTU protocol, RS485 serial interface
IST Modbus TCP/IP protocol, Ethernet port
ISBT BACnet IP protocol, Ethernet port
ISB1 BACnet MSTP protocol, RS485 serial interface, BTL certified
ISBT1 BACnet IP protocol, Ethernet port, BTL certified
ISS SNMP protocol, Ethernet port
MTS Master/Slave Network Management
IAV Remote set-point, 0-10V signal
IAA Remote set-point, 4-20mA signal
IAS Remote signal for second set-point activation
IDL Demand limit from digital input
CP Potential free contacts
MN High and low pressure gauges

Loose accessories

CR Remote control panel
RP Coils protection metallic guards
AG Rubber shock absorbers
AM Spring shock absorbers
FL Flow switch