CWW/Y/BH 81-P÷1204-P

Watercooled Heat Pumps for very high temperature hot water production with scroll compressors and plate exchangers.

The units are designed to produce hot water at very high temperature, in compliance with the most stringent directives on energy efficiency and respect for the environment. In addition to this, their flexibly interacts with all technological plant solutions defined for every type of building, be it residential, commercial or industrial.
These units are ideal for indoor installation and, equipped with a self-contained structure, they can reduce the overall dimensions to a minimum while at the same time making installation and maintenance operations easier.
Thanks to the high construction standard and the precise regulation system, the units are able to guarantee a very high efficiency both at the nominal operating point and in partial load conditions.
These characteristics are visible on the machine's working range which is among the most extensive on the market with the production of hot water leaving the condenser up to 80° C with evaporator water outlet temperatures up to 40° C.
The units are compliant to the ErP Regulation.
On request, units can be supplied with R513A refrigerant.

Versions

CWW/Y/BH - Heat Pump

Power range

37,0-550 kW
11,0-156 Ton

Features

Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
Scroll compressors with oil sight glass, internal overheat protection and crankcase heater.
Condenser AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side in 81-P÷602-P models; with two independent circuits on the refrigerant side and one on the water side in 804-P÷1204-P models, complete with water differential pressure switch.
Evaporator AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side in 81-P÷602-P models; with two independent circuits on the refrigerant side and one on the water side in 804-P÷1204-P models, complete with water differential pressure switch.
Electronic expansion valve.
Electronic high and low pressure gauges.
R134a refrigerant. On request R513A refrigerant.
Electrical board includes: main switch with door safety interlock, fuses, thermal protection relays for compressors, interface relay and terminals for external connections.
Microprocessor control and regulation system.

Accessories

Factory fitted accessories

IM Automatic circuit breakers
SL Unit silencement
RFM Cooling circuit shut-off valve on discharge line
RFL Cooling circuit shut-off valve on liquid line
PV3E 3-Way electronic pressostatic valve for evaporation control
PV3C 3-Way electronic pressostatic valve for cold start
FI Antifreeze heater for evaporator and condenser
SS Soft start
IS Modbus RTU protocol, RS485 serial interface
IST Modbus TCP/IP protocol, Ethernet port
ISB BACnet MSTP protocol, RS485 serial interface
ISBT BACnet IP protocol, Ethernet port
ISS SNMP protocol, Ethernet port
IAV Remote set-point, 0-10V signal
IAA Remote set-point, 4-20mA signal
IAS Remote signal for second set-point activation
IDL Demand limit from digital input
IVE 0-10V signal for the management of the 3-Way electronic pressostatic valve for evaporation control
IVC 0-10V signal for the management of the 3-Way electronic pressostatic valve for cold start
MN High and low pressure gauges

Loose accessories

CR Remote control panel
AG Rubber shock absorbers
AM Spring shock absorbers