THERMICA SYSTEM. MONOBLOCK DEDICATED HEAT PUMPS AND DISTRIBUTION MODULE FOR domestic HOT WATER PRODUCTION UP TO 55 °C.
The system consists of a dedicated monobloc heat pump, Thermica, with an internal distribution module to produce domestic hot water up to 55 ° C. It is therefore possible to integrate heating, the production of domestic hot water and cooling.
The air/water heat pump only needs hydronic connections with the distribution module located inside the building. This itself already contains all the hydraulic and electronic components and this makes the installation procedures particularly simple, as is maintenance.
Versatility and types of application
The versatility of the system in its entirety makes this solution suitable for any type of application: new buildings, renovations with replacement of the existing heating system, or in combination with the same.
It can also be combined with different room terminals:
- radiant floor heating,
- fan coils, low temperature radiators,
- high temperature radiators.
The reversible heat pumps of the Thermica line exploit the heat exchange between the external environment and the system water to supply the water itself with thermal energy to heat or cool the internal environment, or to produce domestic hot water.
Thermica system, synonymous with efficiency
The entire range features A class energy efficiency in heating, with a COP up to 4.35. All models are equipped with Rotary compressor, fully managed by an INVERTER VARIABLE FREQUENCY DRIVE that electronically modulates the compressor speed according to the required cooling/heating load.
The efficiency is very high: delivered and absorbed power is proportionally modulated, the regulation is stepless and the power input is reduced when operating at part load.
Different versions available
The internal distribution module is available in different versions:
Distribution Module with Basement
- Stylish – for domestic hot water production with a 220 l tank
2. All in one – for domestic hot water production with a 220 l tank
Wall mounted Distribution Module
3. Hybrid– for hybrid systems
In both variants, accessibility is made easy by the fact that all components can be reached simply by removing the front panel. All units belonging to the Thermica System range have been developed with a deep attention to the space requirements, an essential element for designers. Even the aesthetic aspect has been specifically studied to make these machines easily insertable in the most varied living contexts.
The units are equipped with a Touch Screen user interface that controls the entire system through an intuitive display of the parameters.
To ensure significant energy savings and the highest level of comfort, the hybrid systems put in place different technologies for the hot water production, which come into play in an intelligent way. Thermica System has the role of distributing the hot water produced by the heat pump, assisted by the boiler or thermal solar, depending on climatic conditions, using the storage tanks.
The advantages of the system can therefore be summarized as follows:
- Reduction in operating costs
- Renewable energies use
- Integration with different energy sources
- Total and non-stop comfort
- Compact system
- Maximum ease of installation
- Smart control logic
Register to our Area Dowload to download the dedicated Thermica System brochure.